教育经历
- 2003年-2007年，重庆大学 材料成型及控制工程 学士
- 2007年-2013年，上海交通大学 材料加工工程 博士
工作经历
- 2023年-至今，77779193永利，教授、博士生导师
- 2026年-至今，上海市大型铸锻件新材料与极端制造重点实验室，副主任
- 2025年-至今，上海交通大学人资处，党委教师工作部副部长（挂职）
- 2020年-至今，金属基复合材料全国重点实验室，固定研究人员
- 2017年-2023年，77779193永利，副教授，博士生导师
- 2015年-2017年，77779193永利，讲师，硕士生导师
- 2018年-2018年，香港理工大学，机械工程系，高级访问学者
- 2014年-2015年，德国马克斯普朗克学会钢铁研究所（MPIE），荷兰材料创新研究所（M2i），博士后
- 2013年-2014年，上海市特种设备监督检验技术研究院，机械工程师
- 2013年-2013年，Altair 工程软件有限公司（上海），非线性有限元软件研发工程师
研究方向
- 材料加工过程多尺度模拟与断裂损伤预测
- 轻质高强金属材料的多尺度力学行为和本构理论
- 晶体塑性/相场建模与AI加速
- 核电/航发高温合金服役性能与寿命预测
- 3D打印合金力学行为及多尺度建模
- 课题组拥有自主开发的多尺度计算软件/代码，如ABAQUS（advanced_elastoplasticity软件包，包含主流的大变形弹塑性本构、随动强化与损伤耦合等，CPFEM软件包）/DEFORM用户子程序、晶体塑性和相场等及计算平台与设备；课题组及交大分析测试中心具有完备、先进的实验设备。
- 课题组常年招收博士后！欢迎发送简历至：hm.zhang@sjtu.edu.cn
科研项目
- 国家科技重大专项（2030）课题，多场耦合条件下合金材料制备、组织性能和服役行为的计算模拟方法与软件开发，202507-202806
- 国家自然科学基金，高温钛合金多火次热成形的组织调控与微织构带抑制策略研究，202501-202812
- 国家自然科学基金，含TRIP效应先进高强钢的多相组织协作机制及成形性能多尺度计算模型，202201-202412
- GFKJG，22GFB-KG01-485，202201-202412
- JWKJW，22GFD-ZS07-232，202201-202312
- 工信部，钛合金热成形过程组织演化跨尺度模拟技术研究，201901-202112（课题负责人）
- 中国航发集团产学研项目，24GFC-JJ16-341，202401-202606
- 国家自然科学基金，金属微成形损伤断裂的尺度相关性机理和多尺度模拟方法研究，2021801-202012
- 上海市东方英才计划，航发锻件多火次热加工的构件级微观结构与缺陷预测，202510-202809
- 上海市探索者计划，基于物理机制的核电不锈钢蠕变多尺度本构模型研究，202509-202708
- 上海市启明星计划，面向航空发动机的高温钛合金热加工多尺度建模与实验研究，202006-202305
- 上海市科技创新行动计划，650-700℃超超临界锅炉管件传热与力学特性研究，202006-202406
- 上海市扬帆计划，基于晶体塑性谱方法与元胞自动机集成的钛合金热成形性研究性研究，201705-202004
- 中央高校基本科研业务费，基于晶体塑性有限元的颗粒增强铝合金材料力学性能表征和塑性成形研究，201510-201812
- 企事业合作项目，镍基合金大锻件热加工特性与组织调控研究，202512-202711
- 企事业合作项目，基于微观物理机制的12Cr1MoV 钢蠕变寿命预测模型开发，202411-202604
- 企事业合作项目，3D打印合金组织-性能计算软件，202501-202506
- 企事业合作项目，23GFH-ZH01-646，202311-202512
- 企事业合作项目，汽车用钢组织微力学性能测试与参数表征技术开发，202303-202410
- 企事业合作项目，主泵泵壳锻件热加工过程数值模拟，202302-202404
- 企事业合作项目，热轧高强厚板材料本构关系及失效准则研究，202209-202312
- 企事业合作项目，先进高强钢微观组织建模和塑性有限元分析辅助工具开发，202110-202302
- 企事业合作项目，炉排片服务性能与失效测试，202202-202212
- 企事业合作项目，第三代汽车钢板氢致断裂研究，202012-202205
- 企事业合作项目，超高强钢组织和夹杂对扩孔翻边性能影响的机理研究，201910-202112
- 企事业合作项目，典型汽车零部件温锻冷挤工艺的开发，201904-202006
- 上海交通大学医工交叉基金，人工颞下颌关节虚拟肌骨生物力学分析研究，201801-202012（工科负责人）
- 上海交通大学医工交叉基金，腭心面综合征患儿上气道流体动力学研究，201701-201912（工科负责人）
- 企事业单位合作项目，超塑变形能量法解析模型及验证，201601-201612
论文信息
- Z.S. Toor, R. Wu, M.R. Hashmi, J.A. Lee, X. Li, H. Yuji, H. Zhang, H.S. Kim, Computation- and process-based design for advanced structural high-entropy alloy development and analyses: A critical review, Progress in Materials Science 155 (2026) 101534.
- Y. Wu, S. Xu, R. Wu, T. Wang, H.S. Kim, H. Zhang, Microstructure-informed crystal plasticity modeling incorporating initial intragranular heterogeneities: insights into deformation mechanisms of additively manufactured alloy, International Journal of Plasticity 195 (2025) 104537.
- Z. Huang, S. Luo, G. Wang, H. Wu, Z. Zheng, H. Zhang, Mechanistic exploration of high strain-hardening and TWIP effects in Fe-15.5Mn-0.6C-1.4Al steel under compression-tensile loading, International Journal of Plasticity 188 (2025) 104292. ESI高被引论文
- S. Xu, H. Zhang, N. Xiao, R. Qiu, Z. Cui, M. Fu, Mechanisms of macrozone elimination and grain refinement of near α Ti alloy via the spheroidization of the Widmannstätten structure, Acta Materialia 260 (2023) 119339.
- X. Shang, M.W. Fu, H. Zhang, J. Liu, X. Zhou, T. Ying, X. Zeng, Unraveling the transformation of ductile damage mechanisms of void evolution and strain localization based on deformation heterogeneity, International Journal of Plasticity 171 (2023) 103785.
- Y. Li, H. Zhang, X. Shang, M. Liu, S. Zhao, Z. Cui, A multiscale investigation on the preferential deformation mechanism of coarse grains in the mixed-grain structure of 316LN steel, International Journal of Plasticity 152 (2022) 103244.
- X. Shang, H. Zhang, L. Wang, G. Zhu, Z. Cui, M.W. Fu, X. Zeng, The effect of stress state and strain partition mode on the damage behavior of a Mg-Ca alloy, International Journal of Plasticity 144 (2021) 103040.
- Shang, X., Zhang, H., Cui, Z., Fu, M.W., Shao, J. A multiscale investigation into the effect of grain size on void evolution and ductile fracture: Experiments and crystal plasticity modeling. International Journal of Plasticity, 125 (2020), 133-149. Most cited articles
- Zhang, H., Liu, J., Sui, D., Cui, Z., Fu, M.W. Study of microstructural grain and geometric size effects on plastic heterogeneities at grain-level by using crystal plasticity modeling with high-fidelity representative microstructures. International Journal of Plasticity, 100 (2018), 69-89. Most cited articles
- Zhang, H., Diehl, M., Roters, F., Raabe, D. A virtual laboratory using high resolution crystal plasticity simulations to determine the initial yield surface for sheet metal forming operations. International Journal of Plasticity, 80 (2016), 111-138. Most cited articles
- S. Fu, S. Luo, X. Hu, C. Lian, H. Zhang, Mechanistic insights into martensitic transformation and DSA coupling in medium-Mn steel: A multiscale experimental and modeling approach, Journal of Materials Research and Technology 40 (2026) 234–250.
- X. Yang, X. Shang, S. Liu, H. Zhang, S. Zhong, Creep modeling for Nickel-based superalloy aligning grain boundary effect and dislocation movement, Computational Materials Science 261 (2026) 114302.
- S. Fu, C. Lian, D. Ji, R. Wu, X. Li, H. Zhang, The mechanistic effects of martensitic resultants on dynamic strain aging in medium-Mn steel, Materials Science and Engineering: A 940 (2025) 148470.
- S. Xu, C. Gao, H. Zhang, N. Xiao, Z. Cui, Asynchronous Spheroidization of the Lamellar Structure in a Near-α Ti Alloy, Metallurgical and Materials Transactions A 56(1) (2025) 1–6.
- R. Wu, L. Xu, H. Park, S.W. Lee, S.Y. Ahn, J.-S. Lee, H. Zhang, Y. Peng, B.-J. Lee, H.S. Kim, Superb thermal stability and strength in Al/Ti/V-modified Ni-based high-entropy alloy via asymmetric cryo-rolling tailored hierarchical microstructures, Scripta Materialia 268 (2025) 116875.
- Z. Huang, S. Fu, Y. Wu, S. Luo, Z. Zheng, H. Zhang, Pre-compression effects on strain-hardening behavior in Fe-15.5Mn-1.4Al-0.6C steel: Insights from TWIP effects and microstructural heterogeneity, Journal of Materials Research and Technology 38 (2025) 1801–1813.
- Y. Xu, B. Wang, Z. Wang, G. Tian, Y. Wang, H. Zhang, Z. He, Deformation and fracture behavior of Ni/Al interpenetrating phase composites sheets prepared by Ni nets and Al foils, Composite Structures 372 (2025) 119569.
- L. Xu, R. Wu, H. Zhang, X. Xue, Y. Peng, Y. Wang, H.S. Kim, Pure copper plate achieving high synergetic strength and electrical conductivity via a novel dynamic offsets and shear force adjustment cryorolling, Materials Science and Engineering: A 941 (2025) 148571.
- Y. Wu, R. Wu, H. Zhang, T. Wang, Q. Huang, H.S. Kim, Understanding the performance improvement mechanism of Ti/steel clad plates fabricated by double-layered hot rolling, Journal of Materials Research and Technology 38 (2025) 823–839.
- R. Wu, F. Cao, H. Zhang, L. Xu, H. Park, S.W. Lee, P. Geng, X. Feng, N. Ma, H.S. Kim, Cooperative and competitive interactions on plastic deformation dynamics in gradient grained dual-phase heterostructures, Scripta Materialia 267 (2025) 116821.
- X. Shang, G. Zhu, H. Zhang, L. Gu, J. Wang, S. Zhong, D. Letzig, X. Zeng, Fabrication and deformation mechanism analysis of an AlCoCrFeNi/magnesium composite, International Journal of Mechanical Sciences 293 (2025) 110205.
- Y. Hou, Z. Ji, H. Zhang, Crystal plasticity modeling for grain size and texture effects on laser shock clinching of ultra-thin foils, Journal of Materials Research and Technology 35 (2025) 3293–3303.
- Z. He, Y. Xu, B. Wang, G. Tian, H. Zhang, Fabrication and mechanical properties of the NiAl sheet with a 3-dimensional network structure prepared by Ni nets and Al foils, Journal of Materials Processing Technology 336 (2025) 118680.
- 谢凯航, 杨重远, 高晨鑫, 章海明, 崔振山, 基于晶体塑性与相场法的近α钛合金再结晶模拟, 塑性工程学报 32(11) (2025) 114–123.
- 武越, 章海明, 刘畅, 白晋龙, 张婷婷, 王涛, 黄庆学, 道次间回炉对热轧钛/钢复合板组织和结合性能的影响, 机械工程学报 60 (2025) 1–11.
- R. Wu, S.Y. Ahn, Y.T. Choi, H. Park, M.J. SaGong, G. Sattineni, H. Kwon, S.G. Jeong, G. Lee, H.H. Lee, H. Zhang, H.S. Kim, Fostering strengths against hydrogen embrittlement: insights from nanotwin-ability and post-treatment effects in additively manufactured CoCrFeMnNi, Materials Research Letters 12(10) (2024) 689–699.
- M.J. SaGong, K.R. Eon, L.J. Ah, P. Hyojin, A.S. Yeoul, X. Shuai, Z. Haiming, W. Renhao, H.S. and Kim, Enhanced strength-ductility synergy in stainless steel 316L through hierarchically tailored microstructure via laser-based repair deposition, Materials Research Letters 12(10) (2024) 709–718.
- Z. Yang, H. Zhang, Y. Zhou, R. Qiu, Z. Cui, Primary slip induced band-like structures and the associated recrystallization kinetics in Ti2AlNb alloy with centimeter-grade coarse grains, Intermetallics 174 (2024) 108466.
- 胡鸿彪, 徐帅, 章海明, 金朝阳, 等轴晶AZ80镁合金的全场晶体塑性模拟研究, 材料导报 38(9) (2024).
- H. Zhang, X. Mao, S. Xu, N. Xiao, N. Zhang, Z. Cui, A physically based elasto-viscoplastic constitutive model for modeling the hot deformation and microstructure evolution of a near α Ti alloy, Materials Science and Engineering: A 872 (2023) 144994.
- Z. Yang, H. Zhang, S. Ju, Z. Cui, X. Yu, H. Liu, Mechanisms of the preferential cleavage of Ti2AlNb-based alloy: The influence of grain size and local plasticity, Materials Science and Engineering: A 867 (2023).
- Z. Yang, H. Liu, Z. Cui, H. Zhang, F. Chen, Refinement mechanism of centimeter-grade coarse grains in as-cast Ti2AlNb-based alloy during multi-directional forging, Materials and Design 225 (2023) 111508.
- S. Xu, C. Gao, N. Xiao, H. Zhang, Z. Cui, Sensitivity of heterogeneous microstructure evolution and preferential variant selection to thermomechanical conditions in a near α titanium alloy, Journal of Alloys and Compounds 947 (2023) 169623.
- H. Wang, H.-m. Zhang, Z.-s. Cui, Z. Chen, D. Chen, Ductile fracture behavior of in situ TiB2 particle reinforced 7075 aluminum matrix composite in various stress states, Transactions of Nonferrous Metals Society of China 33(8) (2023) 2272–2286.
- Y. Hou, J. Wang, Z. Ji, H. Zhang, G. Lu, C. Zhang, Crystal plasticity–based finite element modeling and experimental study for high strain rate microscale laser shock clinching of copper foil, The International Journal of Advanced Manufacturing Technology 128(7) (2023) 3427–3439.
- Z. He, J. Liang, H. Zhang, E. Guo, W. Du, D.J. Politis, L. Wang, Formability and microstructure of laser powder bed fused AlSi10Mg alloy sheets under various deformation conditions, Materials Characterization 199 (2023) 112813.
- S. Xu, X. Xiao, H. Zhang, Z. Cui, Electroplastic Effects on the Mechanical Responses and Deformation Mechanisms of AZ31 Mg Foils, Materials 15(4) (2022) 1339.
- H. Ma, Y. Li, H. Zhang, Q. Li, F. Chen, Z. Cui, A virtual laboratory based on full-field crystal plasticity simulation to characterize the multiscale mechanical properties of AHSS, Scientific Reports 12(1) (2022) 1–16.
- S. Zhao, H. Zhang, Z. Cui, D. Chen, Z. Chen, Superplastic behavior of an in-situ TiB2 particle reinforced aluminum matrix composite processed by elliptical cross-section torsion extrusion, Materials Characterization 178 (2021).
- S. Zhao, H. Zhang, Z. Cui, D. Chen, Z. Chen, Strength and ductility improvement of an in-situ TiB2/Al–Zn–Mg–Cu composite by elliptical cross-section torsion extrusion, Composites Part B: Engineering 216 (2021).
- S. Xu, X. Shang, H. Zhang, X. Dong, Z. Cui, Size effects on the mechanical responses and deformation mechanisms of AZ31 Mg foils, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 52(8) (2021) 3585–3599.
- X. Xiao, S. Xu, D. Sui, H. Zhang, The electroplastic effect on the deformation and twinning behavior of AZ31 foils during micro-bending tests, Materials Letters 288 (2021) 129362.
- X. Wang, H. Zhang, X. Dong, A ductile fracture model for AZ31B considering current parameters in electrically-assisted forming process, Engineering Failure Analysis 129 (2021) 105681.
- H. Wang, H.-m. Zhang, Z.-s. Cui, Z. Chen, D. Chen, Compressive response and microstructural evolution of in-situ TiB2 particle-reinforced 7075 aluminum matrix composite, Transactions of Nonferrous Metals Society of China 31(5) (2021) 1235–1248.
- M. Lv, Y. Fu, Z. Yang, H. Zhang, Z. Cui, A Two-Stage Constitutive Model for Ti2AlNb Alloy Based on Asymptote Approach and Temperature-Corrected Stress, Journal of Materials Engineering and Performance 30(3) (2021) 1957–1969.
- C. Lian, H. Zhang, J. Lin, L. Wang, Deformation mechanism and microstructure evolution of medium-Mn AHSS under various loading conditions, International Journal of Mechanical Sciences 212 (2021) 106812.
- Y. Li, P. Shen, H. Zhang, K. Dong, Y. Deng, X. Chen, Z. Cui, Deformation heterogeneity induced coarse grain refinement of the mixed-grain structure of 316LN steel through limited deformation condition, Materials and Design 210 (2021) 110057.
- Y. Fu, M. Lv, Q. Zhao, H. Zhang, Z. Cui, Investigation on the size and distribution effects of O phase on fracture properties of Ti2AlNb superalloy by using image-based crystal plasticity modeling, Materials Science and Engineering: A 805 (2021) 140787.
- Z. Ding, J. Pan, L. Peng, H. Zhang, B. Hu, J. Li, A.A. Luo, The effect of microstructure on the plastic strain localization and fatigue crack initiation in cast Mg–8Gd–3Y–0.5Zr alloy, Materials Science and Engineering: A 801 (2021) 140383.
- Zhao, S., Zhang, H., Cui, Z., Chen, D., Chen, Z. Particle dispersion and grain refinement of in-situ TiB2 particle reinforced 7075 Al composite processed by elliptical cross-section torsion extrusion. Journal of Alloys and Compounds. 834 (2020), 155136.
- H. Zhu, F. Chen, H. Zhang, Z. Cui, Review on modeling and simulation of microstructure evolution during dynamic recrystallization using cellular automaton method, Science China Technological Sciences 63(3) (2020) 357–396.
- Li, Q., Zhang, H., Chen, F., Xu D., Sui, D., Cui, Z., Study on the plastic anisotropy of advanced high strength steel sheet: Experiments and microstructure-based crystal plasticity modeling. International Journal of Mechanical Sciences 176 (2020), 105569.
- Li, Y., Liu, M., Zhang, H., Liu, J., Cui, Z. Study of the influence of δ-ferrite on the TRIP effect of a low-density high aluminum steel by using full-field crystal plasticity modeling. Materials Science and Engineering: A, 772 (2020), 138667.
- F. Chen, H. Zhu, H. Zhang, Z. Cui, Mesoscale modeling of dynamic recrystallization: multilevel cellular automaton simulation framework, Metallurgical and Materials Transactions A 51(3) (2020) 1286–1303.
- 郑红, 李杨齐, 徐栋恺, 章海明, 崔振山, 基于纳米压痕和晶体塑性有限元模拟的先进高强钢力学性能辨识, 塑性工程学报 27(12) (2020) 113–120.
- 章海明, 徐帅, 李倩, 刘珈汝, 尚晓晴, 董湘怀, 崔振山, 晶体塑性理论及模拟研究进展, 塑性工程学报 27(5) (2020) 12–32.
- J. Pan, L. Peng, P. Fu, H. Zhang, J. Miao, H. Yue, A.A. Luo, The effects of grain size and heat treatment on the deformation heterogeneities and fatigue behaviors of GW83K magnesium alloys, Materials Science and Engineering: A 754 (2019) 246–257.
- Wang, H., Zhang, H., Cui, Z., Chen, Z., Chen, D., Wang, H. Investigation on the high-temperature ductility and fracture mechanisms of an in-situ particle reinforced Al matrix composite 7075Al/TiB2. Materials Science and Engineering: A, 764 (2019), 138263.
- J. Pan, P. Fu, L. Peng, B. Hu, H. Zhang, A.A. Luo, Basal slip dominant fatigue damage behavior in a cast Mg-8Gd-3Y-Zr alloy, International Journal of Fatigue 118 (2019) 104–116.
- H. Zhang, X. Dong, Experimental and numerical studies of coupling size effects on material behaviors of polycrystalline metallic foils in microscale plastic deformation, Materials Science and Engineering: A 658 (2016) 450–462.
- H. Zhang, X. Dong, Physically based crystal plasticity FEM including geometrically necessary dislocations: Numerical implementation and applications in micro-forming, Computational Materials Science 110 (2015) 308–320.
- More articles: https://www.scopus.com/authid/detail.uri?authorId=56907955500
专利著作
- 再结晶与退火（译著），2023.12，上海交通大学出版社
- 改善高温钛合金锻坯晶粒尺寸及取向分布均匀性的方法
- 一种基于电流辅助提升先进高强钢扩孔性能的方法及扩孔率测试装置
- 一种多相金属材料相成分识别的方法
- 细化晶粒的变截面型腔二次扭转挤压装置及方法
- 复杂多相金属材料相成分识别软件
- 基于虚拟光学引伸计的材料应变计算软件
- 基于模块化设计的弹塑性本构模型数值实现软件
社会兼职
- Materials Today Communication，Editor
- Metals and Materials International，编委
- Scientific Reports，编委
- 中国机械工程学会塑性工程分会，微纳米成形技术学术委员会委员
- 中国机械工程学会塑性工程分会，国际合作工作委员会委员
- 中国仿真学会，CAE 仿真专业委员会委员
- 《材料工程》《航空材料学报》青年编委
- 塑性工程学报，青年编委
- Acta Mater、Int J Plasticity、Int J Mach Tool Manu、J Mater Process Tech、Mat Sci Eng A、J Alloy Compd、塑性工程学报、材料工程、航空材料学报等30 多个学术期刊审稿人
荣誉信息
- 2025年，上海市东方英才（上海市优秀青年学术带头人）
- 2025年，上海交通大学教书育人奖
- 2020年，上海市青年科技启明星
- 2017年，上海市青年科技英才扬帆计划
- 2024年，上海交通大学聘期考核优秀
- 2021年，上海交通大学优秀班主任
- 2021年，上海交通大学聘期考核优秀
- 2018年，上海交通大学聘期考核优秀
- 2018年，上海交通大学优秀教工团员
- International Journal Plasticity 高被引论文
- ESI 高被引论文
- Elsevier Excellent、Outstanding审稿人
荣誉奖励
- 上海市自然科学奖二等（1/5），基于微观结构特征的多层级晶体塑性理论与应用研究